All Digital Meter

Digital Thermometer


Using a digital thermometer, you can test your temperature quickly
and accurately. Digital
thermometers are also environmentally friendly containing no mercury.

Specifications:
a) Temperature range: 32oC~42oC
b) Display LoC: temperature below 32oC
c) Display HoC: temperature above 42oC
d) Accuracy: ±0.1oC
e) Display mode: LCD (3.e)
f) Power: 0.15mW ()
g) Battery: AG3 1.5V, ordinary button battery
h) Alarm: thermometer beeps after temperature taken

Digital thermometers are very precise and easy to read and use.

Inner packing: color box
Dimensions: 13.5 x 10 x 1.6 ()
G. W.: 14. W.: 29.5g

Outer packing:
504pcs / carton
Dimensions: 75 x 36 x 29()
N.6kg
G. W.: 17.5kg

PRODUCT DESCRIPTION FOR FLUKE 116 DIGITAL THERMOMETER / MULTIMETER


The Fluke 116 combines the benefits of a multimeter with a digital thermometer.

The value priced digital multimeter is packed with great features for electrical, electronic and temperature troubleshooting.

Accuate temperature measurement from -40' to 400'C

Auto ranging for convenience

MIN/MAX with relative time stamp

Capacitance up to 10,000 microfarads

Microamp functions for testing flame rectification circuits

Basic functions include volts ac and dc, ohms, continuity and diode test.

FLUKE 116 Features:
Basic Accuracy 0.9%
Display Counts 6000
Voltage AC/DC 600
Current AC/DC 10 Amps
Capacitance 10000
Resistance 40 Meg
Temperature -40 to +400 Deg C
Automatic Ranging
Automatic Selection
Continuity Beeper
Sleep Mode
MIn/Max Recording
Display Hold

500-175-20 Mitutoyo Digital Caliper




0-6" Digital Caliper w/SPC Output, 500-175-20 Carbide OD/ID Jaws Large and clear LCD readout. The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point). Data Hold Unit (959143) is optional. Carbide-tipped jaw type calipers are also available. With thumb roller. Except 500-500-10, 500-501-10,500-502-10. Supplied in fitted plastic case. Except 1000mm / 40", supplied in wooden case. Technical Data Accuracy: Refer to the list of specifications (excluding quantizing error) Resolution: 0.01mm or .0005"/0.01mm Repeatability: 0.01mm / .0005 Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Unlimited Battery: SR44 (1 pc.), 938882 Battery life: Approx. 3.5 years under normal use Function Origin-set, Zero-setting, Data output, inch/mm conversion (inch/mm models ONLY) Alarm: Low voltage, Counting value composition error Optional Accessories 959143: Data hold unit 959149: SPC cable with data switch (1m / 40") 959150: SPC cable with data switch (2m / 80") Mitutoyo.


Trail Tech Vapor Dirt Bike Computer

The Trail Tech Vapor Dirt Bike Computer is the latest addition to advanced information systems technology for your dirt bike. The fourth generation Trail Tech Vapor includes Speedometer, Tachometer, Temperature, Distance, Clock, Power. A combined effort from experts in software, electronics, and mechanical design have had their hand in developing the optimal computer system for trail riders, dual sport riders, enduro racers and desert racers. We have equipped several prerunner bikes for such races as the Baja 1000 and even a few race bikes. All report back outstanding reviews.

This is a complete Trail Tech Vapor installation kit. Comes with Trail Tech Vapor computer, power wire, RPM sensor, temperature sensor, speed sensor, handlebar mounting hardware and instructions. The aluminum protector is sold separately.

FITS: Honda CR125R CR250R CR500R CRF250R CRF450R (04-08)

• Speedometer:
  • Current Speed
  • Maximum Speed
  • Selectable MPH/KMH Display
• Tachometer:
  • Real-Time RPM Bar Graph
  • Numeric RPM Readout
  • Dual Programmable Shift Lights
  • Up to 20,000 RPM
• Temperature:
  • Ambient Temperature
  • Engine Temperature
  • Dual Programmable Temp Lights
  • Exact Model Fit Temperature Sensors
  • Selectable °F/°C Display
• Distance:
  • Adjustable Distance
  • Permanent Odometer
  • Selectable Mile/Kilometer Display

• Clock:
  • Hour Meter
  • Stop Watch
  • Ride Time
  • Accumulated Ride Time
  • permanent Hour Meter
  • Selectable 12/24 Hour Display
• Power Input :
  • Includes Power Connection Fits All Machines
  • Accepts Any Power Input - AC/DC
  • Auto Switch to Internal Power if External is Removed
  • Permanent Memory Guarantees Data is Never Lost
• Value Added :
  • Custom Designed for Exact Model Fit
  • All Parts Included to Complete Installation
  • One Year Warranty
  • Unlimited Free Trail Tech Phone and Email Support
  • Waterproof Connections Included
  • Bright White Backlit LCD Display
  • Accessory Dashboards for Most Applications

Avery Berkel FX50 Retail Price Computing Scales

FX50- Price Computing
Aesthetically designed with a compact footprint to maximize counter space and a spacious weigh platter manufactured in high quality stainless steel. The highly portable FX50 can be used both inside and outdoors as both mains and battery power are standard. Power saving functions such as programmable auto power-off and back light display mode are ideal when using the internal rechargable battery. Easy to program and offers up to 50 Price Look-Up keys, 12 of which are hot-shot keys for fast moving items. The FX50 replaces the CZ442 scale.

Fluke 345 Power Quality Clamp Meter

Features & Applications:

With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 Power Quality Clamp Meter is ideal for troubleshooting power quality on switching loads. Additionally, the Hall Effect clamp meter design makes measurement of DC current possible without the need to break the circuit with the power meter. The internal memory of the power analyzer enables long-term power quality logging for analysis of trends or intermittent problems.

Features:

• AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and DC current up to 2000A without breaking the circuit
• Highest safety rating: 600 V CAT IV power analyzer is rated for use at the service entrance
• Accurate in noisy environments: Clamp meter performs even with distorted waveforms present on electronic loads with low-pass filter
• Data logging: Identify intermittent faults by logging any power quality parameter for minutes, or over a month, including harmonics
• Verify batteries: Direct measurement of DC ripple (%) for battery and DC systems
• Troubleshoot harmonics: Analyze and log harmonics digitally or graphically
• Inrush current: Capture and analyze nuisance tripping, from 3 seconds to 300 seconds
• Easy to use: Easily confirm power meter setup with large backlit color display of waveforms and trends
• 3-Phase power: Built in capability for balanced loads
• View graphs and generate reports: Use power analyzer with included Power Log software

Applications:

• Setup and troubleshoot variable frequency drives and UPS systems - Verify correct operation by measuring key power quality parameters
• Harmonics measurements - Uncover harmonic issues that can damage or disrupt critical equipment
• Inrush capture - Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
• Load studies - Verify electrical system capacity before adding loads

Fluke Network Analysis

The JISC RSC YH are pleased to announce the relaunch of the popular fluke network analysis and audit service.

Each college is entitled to a free on-site consultation which will provide a complete picture of the health of your network.

The consultation involves a day's visit and will involve connecting the Fluke analysis tool at various places in your core network to capture information This places minimal load on your network and no threat to security.

After the visit a comprehensive report will be provided detailing:

• Problems found and action plan
• Network map and list of networks found
• List of Routers and switches
• List of servers
• Network Utilisation
• Protocol analysis
• Top protocols and % of bandwidth used
• Detailed Statistics from key devices e.g. Servers and routers

Fluke 289

50,000 count, 320 x 240 Dot matrix LCD display with white backlight. Multiple sets of measurement information are now available in this easy to read display

0.025% Basic DC accuracy

Logging function with TrendView plots measurements as single line to help detect anomalies

F1 - F4 Soft keys provide flexible user function menus

Navigation keys allow the user to quickly select menu choices and scroll through the information screens.

LoZ: low input impedance function helps prevents false readings due to “ghost voltage”

50 Ohm Range for motor winding and low ohm measurements

Low Pass Filter, allows for accurate measurements on motor drives

Saved measurements allows the user to name and recall measurements made in the field

Field upgradeable and expandable meter as new capabilities added

Record events and trends helpful for troubleshooting intermittent problems or profiling loads.

i-info button on board help screens for measurement functions. Unsure about a function- Go to that function and Press the “i” button.

Multi lingual interface

Internal memory allows stand-alone logging for up to 180 hours

Preferred measurement setups can be easily saved

True-rms ac voltage and current for accurate measurements on complex signals or non linear loads. AC bandwidth specified to 100 kHz.

Current measurement 20A (30 seconds momentary; 10A continuous)

Peak capture to record transients as fast as 250 µs

Continuity/Conductance/Capacitance

Resistance and continuity

Min/Max/Average with Time Stamp to record signal fluctuations

Compatible with optional magnetic hanger (ToolPak) for hands free operation

Optical USB communication interface

CAT III 1000 V / CAT IV 600 V safety rated

Limited lifetime warranty